GARMIN Kayak In-hull Transducer Mount

by Fred E, , 11/23/2016
This worked great in a Mokai. I cleaned the hull inside with isopropyl alcohol and used a hair dryer to heat the hull and the 3M300 LSE Adhesive tape surface of the pad to 130 Deg F and placed into position. I used a weight on top of the pad for 24 hours. The Mount was filled with a small amount of water as instructed and transducer pushed it. The picture with my Striker 4 is great, clear, and accurate to within about 2". I use it mostly for bottom depth detection, It also shows objects in deeper water. I am very happy with this product.

by Blake R, , 3/25/2016
Works great!