FREE GROUND SHIPPING ON ORDERS OF $35 AND OVER

HUMMINBIRD SC 110 Autopilot Control Head w/Rotary Knob

Item: 409100-1
This item is brand new
$311.95

NO LONGER AVAILABLE
Backorder, ships in 3 - 4 weeks
|cw
Ask a question   Tell a friend



Contents of the package





Features


SC 110 Autopilot
Humminbird Autopilot Control Head

The SC110 is Humminbird®'s premier Autopilot System incorporating proven steering technology know-how adapted from over 30 years of comprehensive experience. Featuring robust and precise steering control algorithms, a flux-gate compass, a built-in rate gyro and its state-of-the-art multi-sensor technology performs flawlessly, whatever the sea's conditions.

Thanks to intuitive keys, menus and a tactile rotary control knob, the user interface is quickly and easily accessible with simple, straightforward commands to make quick course corrections or setting adjustments, and is easily viewed on a full-color sunlight-viewable LED backlit display.

Ideal for retrofit vessels large and small, thanks to 30 Amps of available continuous pumpset power, the system can support up to two independent chartplotters for navigating to waypoints or saved routes, or can be configured to accept wind input for sailing vessels.


User-Friendly Technology

    Rotating knob for route / wind / menu adjust
    Dedicated course change buttons
    Data protocol NMEA0183
    Quick setup wizard
    NMEA0183 input - 3 To connect two chart plotters, wind systems and external compass
    Multiple Compass support
    Tiller option, supports up to 2
    30 Amp MAX current output to the pump
    Supports constant running and reversing pumpsets
    Supports up to two control heads
    Gimbal Mount option
    Output for analog rudder indicator
    Protective suncover standard
    Multi-sensor mode - use with GPS or with linear feedback
    Integrated on-board rate gyro
    3 Pre-programmed turn patterns
    Advance navigation algorithms support the following modes:
    AUTO: Holds the boat on its existing course
    NAV: Runs a route or direct-to a waypoint from your chartplotter
    WIND: Auto Track and Gybe change and prevent, requires input from your wind sensor
    AUTO TRACK: Holds existing course and compensates for leeway and drift
    DODGE: Use tiller or control buttons to temporarily deviate course, then returns to previous course
    FOLLOW UP: User encoder knob to steer the vessel
    POWER STEER: Use keys to steer the vessel
    Compass calibration mode
    Heading Bargraph
    Cross Track Error Bargraph (XTE)
    Rudder Position Bargraph





Specifications

Display Size:              3.5" diagonal
Display Pixel Matrix:    QVGA 320V x 240H
Display Type:             Transmissive Color TFT LCD
Brightness:                 370 Nits
Display Colors:           65000
Backlight:                   LED
Communications:         NMEA 0183 Bus
Waterproof:                IP 67 Standard
Unit Size -                   Gimbal Mount:    5.5" x 4.8" x 1.8"
Unit Size -                   In-dash Mount:    4.4" x 4.4" x .38"
Voltage :                     12-24V


Item number: 409100-1
UPC: 082324039140
Package weight: 2.3 lb