Welcome Guest - Login

ICOM IC-7600 02 HF/50MHz Transceiver

Item: 7600 02
Ask a question   Tell a friend

This Item is Brand New
Request Price Match
Extended Wty:none 1 yr.$343.10 2 yr.$514.64 

sw|sw Backorder, ships in 10-20 days

Contents of the Package

    IC-7600 02 Radio
    DC power cable
    HM-36 hand microphone
    BM-121 carrying handle
    CW key plug
    Spare fuses



IC-7600 02 HF/50MHz All Mode Transceiver
Push Performance to the Pinnacle

The latest DSP technologies developed for the IC-7800/7700 plus over 45 years of analog circuit expertise give the IC-7600 the performance advantage. The flagship's lineage: dual DSP units, 3kHz 1st (roofing) filter, double-conversion superheterodyne, all direct descendants of the IC-7800/7700.

Dual DSP: Separate DSP units for transmitter/receiver and spectrum scope.
Ist IF Filter: Three built-in 1st IF (roofing) filters – 3, 6 and 15 kHz.
Receiver System: The double-conversion superheterodyne system and the image rejection mixer improve inband IMD.
Display: 5.8-inch WQVGA (400×240 pixels)ultra-wide viewing angle TFT display with long-life LED backlighting.
Spectrum Scope: High-resolution real-time spectrum scope using a dedicated DSP unit.
USB Connectors: Easily connect keyboards, flash memory drives and PCs.
PSK Operation: Built-in PSK and RTTY operation with a USB keyboard - PC not required.

5.8 inch ultra-wide viewing angle TFT display

The IC-7600's ultra-wide viewing angle display has excellent color rendition and high contrast ratio with fast response time. These features allow the spectrum scope and simulated analog meters to move smoothly and naturally. White LED backlighting offers faster start-up, stable brightness, and very long life.
Dual DSP for transmitter/receiver and spectrum scope

contrast ratio with fast response time. These features allow the spectrum scope and simulated analog meters to move smoothly and naturally. While LED backlighting offers faster start-up; stable brightness and very long life.

Two separate 32-bit DSP units power the transmitter/receiver and spectrum scope. These processors give the IC-7600 high performance comparable to our top-of-the-line IC-7800 and IC-7700, thanks to the combination of dual DSP and our analog RF design expertise.
104dB dynamic range and +30dBm third-order intercept point (IP3)

Icom's long years of analog RF circuit experience combined with the latest digital technology results in an astonishing 104dB receiver dynamic range and +30dBm IP3 in the HF bands without sacrificing receiver sensitivity. Even a weak signal adjacent to strong signals is clearly received by the IC-7600.
Double conversion superheterodyne dramatically improves inband IMD

The IC-7600 employs a double conversion superheterodyne system which has an image rejection mixer for the 2nd mixer stage. When compared to a typical triple-conversion system, the double conversion system is more difficult to implement but it dramatically reduces signal distortion and provides a high-fidelity RF signal to the DSP processor.
Dual AGC loops controlled by DSP

The IC-7600 has dual AGC loops, one analog and one digital, both under DSP control. This architecture prevents strong adjacent signals from "pumping" the AGC and allows maximum dynamic range in the DSP.
Three built-in 1st IF (roofing) filters, including 3kHz

The IC-7600 has three built-in 1st IF filters ahead of the 1st IF amplifier stage. The 3kHz filter is especially effective in CW and SSB modes to eliminate overloading caused by strong signals just outside the passband.
Digital IF filter

The IC-7600 DSP allows you to "build your own" digital IF filter. You can quickly choose bandwidth, shape factor and center frequency, so that you can work that rare DX station while your competition's still tweaking their transceiver controls. There filter memories allow you to change filter settings instantly, a great help during contesting or other high-rate operating.
Digital twin PBT

After "building your own" digital IF filter, you can use digital twin Passband Tuning (PBT) to shift and narrow the IF passband until the interference is gone and you can clearly hear that weak signal.
Digital notch filter

Signals such as heterodynes and AM carriers can be eliminated with automatic notch filter technology, making interference from RF sources such as beat signals and RTTY signals a thing of the past. You can also choose three shape factors for the notch filter, to optimize interference rejection.
Noise reduction

The processing power of the 32-bit DSP produces results you can hear! The 16-step variable noise reduction can significantly enhance the receiver's signal-to-noise ratio, giving you a clean, clear audio signal that may make the difference between making the contract or not.
Noise blanker

A 100-step digital noise blanker reduces interference from pulse-type noise sources such as engine ignition systems.

Two Tx/Rx antenna connectors with automatic antenna selector
Rx antenna In/Out connector for receiver antenna or external attenuator
General coverage receiver covers from 30kHz to 60MHz (* Some frequency bands are not guaranteed, depending on version)
Two types of receiver preamplifiers: Preamp 1: Increase low level signal improving intermodulation characteristics Pream 2: High gain amplifier
Built-in 3-step RF attenuator (6,12 and 18dB)
Tx monitor
50 CTCSS tone encoder and decoder
All mode power control
VOX capability (Voice operated transmission)
Multi-function electronic keyer with adjustable keying speed, dot-dash ratio and paddle polarity and bug key function
DSP controlled CW keying waveform shaping
Frequency lock function for split operation
The normal (default) CW carrier point is selectable from USB and LSB
APF (audio peak filter) function with soft/sharp filter shape
Double key jack system
Full break-in function and semi break-in function
CW pitch control from 300 to 900Hz
Adjustable CW envelope
Set mode function for flexible and speedy setting
Memory pad stores up to 10 (or 5) operating frequencies
Quick split function enables split operation with a single action
Digital meter indicates output power, ALC level, SWR, COMP (compression level), Id (drain current of the final amplifier) and VD (voltage of the final amplifier)
Single knob control from squelch volume to RF gain
UTC/Local Clock and timer function
1Hz pitch tuning and 1Hz indication
101 memory channels with 10-character comment
Built-in voice synthesizer announces operating frequency, mode and receiving signal strength
Programmed scan, memory scan, select memory scan, VSC scan and ∂F scan
Auto tuning step function
Band edge beep
Main dial tension control and dial lock
CI-V interface capability and RS-232C connector for PC connection
AH-4 control circuit
Triple band stacking register
FFT scope wave averaging function


Display                5.8" WQVGA
Power                  100W
Frequency           Tx: Bands from 1.8-54.0; Rx: 0.03 - 60.0
Modes                  LSB, USB, CW, RTTY, PSK31, AM, FM
Tuner                   Built-in
Remote Options    IP remote control through optional PC software
Other Functions    USB Port
Dimensions          13.4"W x 4.6"H x 11.0"D
Waterproof           No
Warranty              Two Year

Item number: 7600 02
UPC: -
Shipping weight: -

Thank you for shopping at!
Subscribe to our mailing list  

13431 Beach Ave. Marina Del Rey, CA 90292  | My Account | Contact Info & Support
About gps4us | Testimonials | News | Terms & Conditions | Privacy Policy | Shipping & RMA
© 2019-2021 GPS4US Online Store, All Rights Reserved.