ICOM M506 VHF w/ Hailer, AIS, N2K, Rear Mic
Cables
Mounts
Various
Other
Contents of the package
M506 VHF
Rear-Mount mic w/ 20' extension cable
Installation hardware
Owner's manual
Features
SALE UNTILL 12/31/2015 IC-M506 41 Icom M506 VHF Radio with AIS Receiver and Rear-Mount MIcWith Built-in Loudhailer/Foghorn, NMEA 2000, and Remote Capability
With an integrated AIS receiver, the IC-M506 can show AIS vessel traffic information on the display. The AIS target call function allows you to easily set up an individual DSC call. The Plotter, Target list and Danger list can be toggled on the display.
With the plug-and-play functionality of NMEA 2000, the IC-M506 can easily connect to a NMEA 2000 network and interconnect with other equipment. Also the NMEA 0183 input/output can be used for external GPS/NAV interface.
The Icom M506 sets the standard for marine communications. With the large 3.4" LCD, reading GPS, AIS, DSC and radio menus are easier than ever. The bottom line of the display shows the software key functions and the functions can be toggled with the left and right buttons.
When connected to an external hailer horn, you can talk to people on the deck or shore from the radio’s microphone and can hear people’s reply via the hailer horn. Foghorn and RX speaker functions are also available.
The optional COMMANDMIC, HM-195B/SW provides 2nd station capability for using the IC-M506 from a separate cabin or tower. Most functions including DSC and AIS functions can be controlled from the COMMANDMIC and can be used as an intercom between the IC-M506 and the COMMANDMIC.
The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call.
The last call voice recording function automatically saves the last two minutes of the last incoming call. You can also start recording manually.
The units is IPX8 submersible and can be fitted with an optional voice scrambler.
Specifications
Display 3.4" diag. LCDControl Type Rotary knob for channel change
Power 25 Watts, 1 Watt
Remote Options Full function Command Mic IV; Note: This version has the microphone connector on the
rear for remote mounting (includes 20' cable)
Interface NMEA 0183 in/out; NMEA 2000
Other Functions 25 Watt loudhailer/fog horn (speaker required); optional voice scrambler; built-in AIS
receiver; last call recording
Dimensions 7"W x 4.5"H x 4.5"D
Warranty Three Years
Item number: M506 41
UPC: 731797013743
Package weight: 5.7 lb
Other Products in the Series: