Products

17 results - Page: 1 of 1

LEE PRECISION .356 Bullet Lube and Size Kit - 90046
The Lee Precision .356 Bullet Sizing Kit sizes cast bullets, also seats and crimps gas checks. It fits any standard 7/8 x 14 thread reloading press. ... More info

$24.60

$24.60Qty:

LEE PRECISION 6.5 Grendel Pacesetter - 90557
The Lee Precision 6.5 Grendel Very Ltd. Production 3-Die Set includes Full Length Sizing Die, Easy Adjsut Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, instructions and load data. ... More info

$45.31

$45.31Qty:

LEE PRECISION Breech Lock Pro Shell Plate 2 - 90584
The Lee Precision Breech Lock Pro Shell Plate number 2 works with 45 ACP, 45 GAP, etc. cartridges. ... More info

$24.95

$24.95Qty:

LEE PRECISION Breech Lock Pro Shell Plate 19 - 90944
The Lee Precision Breech Lock Pro Shell Plate number 19 works with 40 S and W, 10mm Auto, 9mm Luger, 38 Super, 38 Auto, 41 AE cartridges. ... More info

$24.95

$24.95Qty:

LEE PRECISION Charging Die Kit - 90995
The Lee Precision Short and Long Charging Dies are included in this kit for use with the Auto-Disk, Pro Auto-Disk, and Auto-Drum Powder Measure. It works with cases .860 to 2.620 inches long, and bullet diameters .223 and larger. It works the same as the pistol Powder Through Expanding Die, except it does not expand the case mouth. Rifle case expansion is done in the Sizing die. ... More info

$28.11

$28.11Qty:

LEE PRECISION Cutter and Lock Stud - 90110
Use the Lee Precision Cutter and Lock Stud with the Case Length Gauge and Shell Holder to trim cases. Can be used by hand or with an electric drill. Works on all brass less than .475 base diameter. If you are looking for trimming cases with a base diameter larger than .475, order the large cutter and lock stud. ... More info

$8.95

$8.95Qty:

LEE PRECISION Modern Reloading Manual 2nd Edition - 90277
The Lee Precision Modern Reloading 2nd Edition book is one of the most comprehensive load data manuals, 692 pages written by Richard Lee, printed in 2011. Reprinted in 2016, including a 12 page Final Chapter written by John Lee. It includes over 36,000 loads coering 178 cartridges in a new, larger, easier to read format, with velocities for starting loads. This is the best kind of load data, it is supplied by the powder companies. It also feature ... More info

$25.68

$25.68Qty:

LEE PRECISION Powder Measure Kit - 90100
The Lee Precision Powder Measure Dipper Kit includes 15 graduated powder dippers from .3cc to 4.3cc. The Slide card included has a powder dispensing chart. Dipper data revised April of 2012. The Lee Precision Powder Measure Kit is made in the USA. ... More info

$18.59

$18.59Qty:

LEE PRECISION Universal Flaring Die - 90798
The Lee Precision Universal Flaring Die gently flares the case mouth to accept cast bullets without shaving. It includes neck plugs for .22 cal through .45 cal. ... More info

$16.79

$16.79Qty:

LEE PRECISION Case Condtion Combo - 92160
The Lee Precision Case Conditioning Combo inlcudes cutter and lock stud, chamfer tool and primer pocket cleaner. Order the appropriate-ácase length gauge to complete this kit. ... More info

$13.95

Notify when back in stock

OUT OF STOCK

LEE PRECISION Commercial Mold Handles - 90005
The Lee Precision Commercial Mold Handles fits Lee 6-Cavity Molds. It also fits most other brands of single and double cavity molds. ... More info

$29.11

Notify when back in stock

OUT OF STOCK

LEE PRECISION Factory Crimp Die .223 - 90817
The Lee Precision .223 Remington Factory Crimp Die crimps the bullet in place more firmly than any other tool. It works with .223 Remington and .223 Ackley Improved. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity ... More info

$16.95

Notify when back in stock

OUT OF STOCK

LEE PRECISION Ingot Mold - 90029
The Lee Precision Ingot Mold is made of rustproof aluminum mold casts 0.5 and 1 lb. ingots, 2 of each. It is perfect for re-melting and alloying. ... More info

$25.83

Notify when back in stock

OUT OF STOCK

LEE PRECISION Pacesetter Dies .223 - 90502
The Lee Precision Pacesetter Dies includes the exclusive Lee factory crimp die. A conventional bullet seater and roll crimper. You can choose the type of crimp you desire. Includes shell holder, powder dipper, load data and are packed in the nicest storage box ever designed. ... More info

$46.02

Notify when back in stock

OUT OF STOCK

LEE PRECISION Pacesetter Dies .308 - 90507
The Lee Precision Pacesetter Dies includes Full Length Sizing Die, Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions with Load Data. ... More info

$45.65

Notify when back in stock

OUT OF STOCK

LEE PRECISION Powder Measure Riser - 90041
The Lee Precision Powder Measure Riser raises the case activated powder measure higher above the mounting location on the Turret Press to provide clearance for use of the Safety Prime. ... More info

$10.95

Notify when back in stock

OUT OF STOCK

LEE PRECISION Resizing Lube 1 Tube - 90006
Lee Precision Resizing Lube eliminates stuck and dented cases, makes sizing less work. Non-sticky, non-allergenic, and can be thinned with water. ... More info

$7.95

Notify when back in stock

OUT OF STOCK

17 results - Page: 1 of 1