GARMIN GMR 404 Open Array Radar
Split Connector 50ft Right Angle RJ45 Plug
Contents of the package
GMR 404 6 ft Open Array (must be used in combination with pedestal below)
Pedestal, 010-00484-02, must be purchased separately.
- GMR 404/406 Radar Pedestal
- Carrying strap
- Field material kit
- Marine network data card
- Field install cable end kit
- Voltage converter unit
- Owner's manual
- Installation instructions
The GMR 404 is a 4-foot open array scanner with 1.8° beamwidth and a range of 72 nautical miles. With this beamwidth and 4 kilowatts of power, the 404 offers outstanding clarity, precision and target definition. You can also use the 404 to avoid traffic on the water with MARPA target tracking.
The GMR 404 transmits data over the Garmin Marine Network, a 100-megabit plug-and-play proprietary network that gives you the ability to expand your boat’s system as needed. Once connected to the network, any network-compatible Garmin chartplotter can double as your radar screen. And as an aid to locational awareness, you can overlay the GMR 404 radar image on the chartplotter's map page. You can also split the on-screen display so that you can view the map and the standard radar page simultaneously.
SpecificationsUnit dimensions: array: 4' (1.22 meters); pedestal: 24" x 11" x 16" (61 x 28 x 40.6 cm)
Weight: array: 12 lb (5.4 kg); pedestal: 42 lb (19 kg)
Waterproof: yes (IPX6)
Antenna sweep: 24 and 48 rpm
Transmit power: 4 kW
Power input: 10.5 - 38 V DC, 45 W
Beam width: 1.8° horizontal, 25° vertical
Maximum range: 72 nm
Minimum range: 20 meters
Garmin Marine Network™ compatible
MARPA target tracking (collision avoidance): yes (requires heading sensor; sold separately)
Guard zone alarm
Item number: 010-00484-00
Package weight: 25 lb
Other Products in the Series:
List of Compatible Units:
Note: Displayed are products sold in gps4us store.
There might be more GPS units compatible with chosen accessory.